Home > Hydraulic Puller Stringing Equipment
Products

Hydraulic Puller 18 ton SA-YQ180 for stringing 4 conductors

Item No.: 07051a
18 Ton hydraulic puller is used for pulling 4 conductors on 400 - 500 KV overhead transmission line. It is equipped with hydraulic reel winder for GSP1600 reel.
INQUIRY
Description
18 Ton hydraulic puller is used for pulling 4 conductors on 400 - 500 KV overhead transmission line. It is equipped with hydraulic reel winder for GSP1600 reel.


1. SA-YQ180 Hydraulic Puller
Item No. 07051
Model SA-YQ180
Stringing capacity 1 pilot steel wire rope
Max. Pulling Force (KN) 180
Max. Continuous Pulling Force (KN) 160
Speed at Max. continuous pull: 2.5km/h
Max. Pulling Speed (m/min) 5km/h
Root Diameter of Bull wheel (mm) Φ760
Number of grooves 9
Max. Steel rope Diameter (mm) Φ30
Model of Diesel Engine Water cooled diesel engine
Power of Diesel Engine 223 KW
Rotate Speed of Engine (rpm) 2100
Electrical System DC24V
Weight (kg) 8000
Dimension (m) 5.58 x 2.30 x 2.82
 
Application: The hydraulic puller is used to pull four bundled conductors or 2 bundled conductors for power line construction. It is fully hydraulic controlled, easily used and maintained
Features:
  • Closed hydraulic circuitinfinitely variable speed control in both rotating directions.
  • The max pulling force for stringing operation can be preset, pulling force in the rope can be read on the line pull gauge.
  • Automatic over pulling protection system
  • Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.
  • Hydraulic oil cooling system.
  • Heat treated wear-proof bull wheels
  • With rigid axle for towing at high speed, the machine looks beautiful.
  • Hydraulic actuated pulling rope clamp for convenient reel change.
  • Integral self-loading reel winder with automatic level wind.
 
Main Components:
  • Engine: Cummins water-cooled diesel engine. (USA)
  • Main variable displacement hydraulic pump and main motor: Rexroth  (German)
  • Reducer: Rexroth. (Germany)
  • Reel winder motor: Danfoss (Danish)
  • Main hydraulic valves: Rexroth (Germany
  • Hydraulic instruments: WIKA (German)
  • Radiator: AKG (German) 
2. SA-QY180 Hydraulic Puller
Item No. 07053
Model SA-QY180
Stringing capacity 1 pilot steel wire rope
Max. Pulling Force (KN) 220
Max. Continuous Pulling Force (KN) 180
Speed at Max. continuous pull: 2.5km/h
Max. Pulling Speed (m/min) 5km/h
Root Diameter of Bull wheel (mm) Φ760
Number of grooves 10
Max. Steel rope Diameter (mm) Φ32
Model of Diesel Engine Water cooled diesel engine
Power of Diesel Engine 245 KW
Rotate Speed of Engine (rpm) 2100
Electrical System DC24V
Weight (kg) 8500
Dimension (m) 5.58 x 2.35 x 2.82
 
Application: The hydraulic puller is used to pull four bundled conductors or 2 bundled conductors for power line construction. It is fully hydraulic controlled, easily used and maintained
Features:
  • Closed hydraulic circuitinfinitely variable speed control in both rotating directions.
  • The max pulling force for stringing operation can be preset, pulling force in the rope can be read on the line pull gauge.
  • Automatic over pulling protection system
  • Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.
  • Hydraulic oil cooling system.
  • Heat treated wear-proof bull wheels
  • With rigid axle for towing at high speed, the machine looks beautiful.
  • Hydraulic actuated pulling rope clamp for convenient reel change.
  • Integral self-loading reel winder with automatic level wind.
 
Main Components:
  • Engine: Cummins water-cooled diesel engine. (USA)
  • Main variable displacement hydraulic pump and main motor: Rexroth  (German)
  • Reducer: Rexroth. (Germany)
  • Reel winder motor: Danfoss (Danish)
  • Main hydraulic valves: Rexroth (Germany
  • Hydraulic instruments: WIKA (German)
  • Radiator: AKG (German)